User's Manual

Using the CMC Web Interface 99
Viewing Status of the Temperature Sensors
The Temperature Sensors Information page displays the status and readings
of the temperature probes on the entire chassis (chassis, servers, IOMs, and
iKVM).
NOTE: The temperature probes value cannot be edited. Any change beyond the
threshold will generate an alert that will cause the fan speed to vary. For example, if
the CMC ambient temperature probe exceeds threshold, the speed of the fans on
the chassis will increase.
To view the health status of the temperature probes:
1
Log in to the CMC Web interface.
2 Select Temperature Sensors in the system tree. The Temperature Sensors
Information
page displays.
Table 5-6 provides descriptions of the information provided on the
Temperature Sensors Information page.
Table 5-6. Temperature Sensors Health Status Information
Item Description
Present Indicates whether the sensor is present (Yes) or absent (No) in the
chassis.
Temperature ID Displays the numeric ID of the temperature probe.
Name Displays the name of each temperature probe on the chassis,
servers, IOMs, and iKVM. Examples: Ambient Temp, Server 1
Temp, I/O Module 1, iKVM Temp.
Reading Indicates the current temperature in degrees Centigrade.
Threshold
Maximum
Indicates the highest temperature, in degrees Centigrade, at which
a Failure alert is issued.
Threshold
Minimum
Indicates the lowest temperature, in degrees Centigrade, at which a
Failure alert is issued.