User's Manual

176 Using FlexAddress
Troubleshooting FlexAddress
This section contains troubleshooting information for FlexAddress.
1
If a feature card is removed, what will happen?
Nothing will happen. Feature cards can be removed and stored or may be
left in place.
2 If a feature card that was used in one chassis is removed and put into
another chassis, what will happen?
The Web interface will display an error that states:
This feature card was activated with a different
chassis. It must be removed before accessing the
FlexAddress feature.
Current Chassis Service Tag = XXXXXXXX
Feature Card Chassis Service Tag = YYYYYYYY
An entry will be added to the CMC log that states:
cmc <date timestamp> : feature
'FlexAddress@XXXXXXX' not activated; chassis ID=
'YYYYYYY'
3
What happens if the feature card is removed and a non-FlexAddress card is
installed?
No activation or modifications to the card should occur. The card will be
ignored by CMC. In this situation, the
$racadm featurecard -s will return a
message of:
No feature card inserted
ERROR: can't open file
4
If the chassis service tag is reprogrammed, what happens if there is a
feature card bound to that chassis?
The Web interface will display an error that states:
This feature card was activated with a different
chassis. It must be removed before accessing the
FlexAddress feature.