User's Manual

Using the CMC With Microsoft Active Directory 203
16 If Use DHCP (for NIC IP Address) is enabled (checked), do one of the
following:
• Select
Use DHCP to Obtain DNS Server Addresses to enable the
DNS server addresses to be obtained automatically by the DHCP
server., or
• Manually configure a DNS server IP address by leaving the
Use DHCP
to Obtain DNS Server Addresses
check box unchecked and then
typing your primary and alternate DNS server IP addresses in the
fields provided.
17 Click Apply Changes .
The CMC Extended Schema Active Directory feature configuration is
complete.
Configuring the CMC With Extended Schema Active Directory and
RACADM
Using the following commands to configure the CMC Active Directory
Feature with Extended Schema using the RACADM CLI tool instead of the
Web interface.
1
Open a Telnet/SSH text console to the CMC, log in, and type:
racadm config -g cfgActiveDirectory -o cfgADEnable
1
racadm config -g cfgActiveDirectory -o cfgADType 1
racadm config -g cfgActiveDirectory -o
cfgADRacDomain <
fully qualified CMC domain name >
racadm config -g cfgActiveDirectory -o
cfgADRootDomain <
fully qualified root domain name >
racadm config -g cfgActiveDirectory -o
cfgADRacName <
CMC common name >
racadm sslcertupload -t 0x2 -f <
ADS root CA
certificate
> -r
racadm sslcertdownload -t 0x1 -f <
CMC SSL
certificate
>