User's Manual

Using the iKVM Module 261
or
Click the
Clear button to remove all servers from the Scan list.
2 Click the Add/Remove button, and then click OK .
To start Scan mode:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Commands . The Command dialog box appears.
3 Select the Scan Enable box.
4 Click OK . A message appears indicating that the mouse and keyboard have
been reset.
5 Click to close the message box.
To cancel scan mode:
1
If OSCAR is open and the Main dialog box is displayed, select a server in
the list.
or
If OSCAR is
not open, move the mouse or press any key on the keyboard.
Scanning stops at the currently selected server.
or
Press <Print Screen>. The
Main dialog box appears; select a server in the
list.
2 Click the Commands button. The Commands dialog box appears.
3 Clear the Scan Enable box.
Broadcasting to Servers
You can simultaneously control more than one server in the system to ensure
that all selected servers receive identical input. You can choose to broadcast
keystrokes and/or mouse movements independently.
NOTE: You can broadcast up to 16 servers at a time.