User's Manual
CMC Overview 29
Supported Remote Access Connections
Table 1-3 lists the connection features.
Supported Platforms
The CMC supports modular systems designed for the M1000e platform. For
information about compatibility with the CMC, see the documentation for
your device.
For the latest supported platforms, see the Dell PowerEdge Compatibility
Guide located on the Dell Support website at support.dell.com.
Supported Web Browsers
Table 1-4 lists the Web browsers supported as CMC clients.
Table 1-3. Supported Remote Access Connections
Connection Features
CMC NIC
• 10Mbps/100Mbps/1Gbps Ethernet via CMC GbE port
• DHCP support
• SNMP traps and email event notification
• Dedicated network interface for the CMC Web interface
• Network interface for the iDRAC and I/O Modules (IOMs)
• Support for Telnet/SSH command console and RACADM CLI
commands including system boot, reset, power-on, and shutdown
commands
Serial port
• Support for serial console and RACADM CLI commands
including system boot, reset, power-on, and shutdown commands
• Support for binary interchange for applications specifically
designed to communicate with a binary protocol to a particular
type of IOM
• Serial port can be switched to IOMs using the
connect
command
Other
connections
• Access to the Dell CMC Console through the Avocent
®
Integrated KVM Switch Module (iKVM)