User's Manual

342 RACADM Subcommands
getmacaddress
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the MAC/WWN addresses for all modules or for a specified module.
Usage
racadm getmacaddress [-m < module >] [<-t iscsi]
racadm getmacaddress [-a]
Options
Table A-14 describes the getmacaddress subcommand options.
Example
racadm getmacaddress -m server-1
<Name> <Presence> <BMC MAC Address> <NIC1 MAC Address>
<NIC2 MAC Address>
server-1 Present 00:11:43:FD:B7:2A 00:11:43:FD:B7:2A
Table A-14. getmacaddress Subcommand Options
Option Description
-m <module> Specifies the module whose MAC address you want to view.
<module> may be one of the following:
• chassis
•
server- n where n= 1–16
•
switch- n where n =1–6
-t Displays the iSCSI MAC addresses for all servers or the specified
server if used with -m option.
-a Displays the Ethernet and iSCSI MAC/WWN addresses for all
iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for
a particular slot, then the chassis-assigned MAC/WWN address is
displayed.