User's Manual

RACADM Subcommands 345
Server-15 Present ON OK
Server-16 Present ON OK
KVM Present ON OK
getniccfg
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays network settings for a server, switch, or the chassis.
NOTE: The getniccfg subcommand will display an error message if the operation is
not successful.
Usage
racadm getniccfg [-m < module >]
Options
Table A-16 describes the getniccfg subcommand options.
Examples
racadm getniccfg
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Table A-16. getniccfg Subcommand Options
Option Description
-m <module> Specifies the module whose network settings you want to view.
<module> may be any of the following:
• chassis
• server- n where n =1–16
•
switch- n where n =1–6
Default: chassis