User's Manual

RACADM Subcommands 349
Overall Power Health = OK
Redundancy = No
[System Power Policy Configuration]
System Input Power Cap = 7928 W (7928
BTU/hr | 10%)
Surplus for Peak Performance = 7000 W (6130
BTU/hr)
Redundancy Policy = None
Dynamic PSU Engagement Enabled = No
[Power Budgeting]
System Input Max Power Capacity = 0 W
Input Redundancy Reserve = 0 W
Input Power Allocated to Servers = 0 W
Input Power Allocated to Chassis Infrastructure = 51W
Total Input Power Available for Allocation = 0 W
Standby Input Power Capacity = 0 W
getraclog
NOTE: To use this subcommand, you must have CMC Login User privilege.
Description
Displays the CMC log entries. The timestamp begins at midnight, January 1
and increases until the system boots. After the system boots, the system’s
timestamp is used.
Usage
racadm getraclog [-i]
racadm getraclog [-s <
start record >] [-c < count >]
[-m]
Options
Table A-17 describes the getraclog subcommand options.