User's Manual

370 RACADM Subcommands
setassettag
NOTE: To use this subcommand, you must have Administrator privilege.
Description
Sets the N-byte ASCII asset tag for the chassis.
Usage
racadm setassettag -m chassis < asset tag >
Options
Table A-28 describes the setassettag subcommand options.
Example
Input:
racadm setassettag -m chassis 783839–33
or
racadm setassettag 783839–33
The asset tag was changed successfully.
setflexaddr
NOTE: To use this subcommand, you must have Chassis Configuration
Administrator privilege.
Table A-28. setassettag Subcommand Options
Option Command
-m <module> Specifies the module whose asset tag you want to set.
Legal value: chassis
NOTE: Because there is only one legal value, you can
obtain the same output if you do not include this option.