User's Manual

384 RACADM Subcommands
Example
racadm testemail -i 1
Test email sent successfully.
testtrap
NOTE: To use this subcommand, you must have Test Alert User privilege.
Description
Tests the CMC SNMP trap alerting feature by sending a test trap from the
CMC to a specified destination trap listener on the network.
NOTE: This command is valid only if SNMP alerts are enabled on the CMC. For
more information about SNMP alerts, see "Configuring SNMP Alerts" on page 286.
Usage
racadm testtrap -i < index >
Options
Table A-41 describes the testtrap subcommand options.
Example
racadm testtrap -i 4
Test trap sent successfully.
Table A-41. testtrap Subcommand Options
Option Description
-i <index> Specifies the index of the trap configuration to use for the test.
Legal values: 1–4