User's Manual

CMC Property Database Group and Object Definitions 417
# cfgChassisStandbyInPowerCapacity
Read only. Indicates the amount of power (in watts) available for powering up
any hardware modules that are either added to the chassis or powered up (if
they are already present in the chassis).
# cfgChassisPowerClear
Write only. To reset cfgChassisMinPower and cfgChassisMaxPowerCapacity,
set this object to 1.
# cfgChassisPowerClearTimestamp
Read only. Time stamp when cfgChassisMinPower and
cfgChassisMaxPowerCapacity were reset.
cfgChassisPowerButtonEnable
Indicates if the chassis power button is enabled or disabled.
Va lu e s: 0 (disabled), 1 (enabled)
# cfgSystemEnergyConsumptionClear
Write only. To reset energy statistics, set this value to 1.
Examples
racadm getconfig -g cfgChassisPower
# cfgChassisInPower=0 W | 0 BTU/hr
# cfgChassisPeakPower=0 W
# cfgChassisPeakPowerTimestamp=06:32:55 01/26/2009
# cfgChassisMinPower=0 W
# cfgChassisMinPowerTimestamp=06:32:55 01/26/2009
# cfgChassisPowerStatus=5
# cfgChassisRedundantState=0
cfgChassisPowerCap=7928 W
cfgChassisPowerCapF=7928 W
cfgChassisPowerCapBTU=200 BTU/hr
cfgChassisPowerCapFBTU=200 BTU/hr
cfgChassisPowerCapPercent =10%
cfgChassisPowerCapFPercent =10%
cfgChassisRedundancyPolicy=0