User's Manual

Using the LCD Panel Interface 441
Critical Hdwar version err: Version Change
sensor, hardware incompatibility
(BMC firmware and CPU
mismatch) was asserted
CPU and firmware not compatible
Critical Mem Overtemp: Memory sensor,
correctable ECC <DIMM
Location> was asserted
Memory module overheating
Critical Mem Fatal SB CRC: Memory
sensor, uncorrectable ECC was
asserted
South bridge memory failed
Critical Mem Fatal NB CRC: Memory
sensor, uncorrectable ECC was
asserted
North bridge memory failed
Critical WatchDog Timer: Watchdog
sensor, reboot was asserted
Watch dog timer cause system to
reboot
Critical WatchDog Timer: Watchdog
sensor, timer expired was asserted
Watch dog timer expired but no
action taken
Warning Link Tuning: Version Change
sensor, successful software or F/W
change was deasserted
Failed to update link tuning
setting for proper NIC operation
Warning Link Tuning: Version Change
sensor, successful hardware change
<device slot number> was
deasserted
Failed to update link tuning
setting for proper NIC operation
Critical LinkT/ FlexAddr: Link Tuning
sensor, failed to program virtual
MAC address (Bus # Device #
Function #) was asserted
FlexAddress could not be
programmed for this device
Critical LinkT/ FlexAddr: Link Tuning
sensor, device option ROM failed
to support link tuning or flex
address (Mezz <location>) was
asserted
Option ROM does not support
FlexAddress or link tuning.
Table C-8. Server Status Screen (continued)
Severity Message Cause