User's Manual

48 Installing and Setting Up the CMC
5 Select the duplex mode (half or full) that matches your network
environment.
NOTE: The network speed and duplex mode settings are not available if Auto
Negotiation is set to On or 1000MB (1Gbps) is selected.
NOTE: If auto negotiation is turned on for one device but not the other, then
the device using auto negotiation can determine the network speed of the
other device, but not the duplex mode; in this case, duplex mode defaults to
the half duplex setting during auto negotiation. Such a duplex mismatch will
result in a slow network connection.
Press the center button to continue to the next CMC Network Settings
screen.
6 Select the mode in which you want the CMC to obtain the NIC IP
addresses:
Dynamic Host
Configuration
Protocol (DHCP)
The CMC retrieves IP configuration (IP address, mask, and
gateway) automatically from a DHCP server on your
network. The CMC will be assigned a unique IP address
allotted over your network. If you have selected the DHCP
option, press the center button. The Register DNS? screen
appears; go to step 7.