Users Guide

<Structure><Type><État>
Fabric-A ethernet disabled
Fabric-B iSCSI enabled
Fabric-C fiber channel enabled
l racadm getflexaddr -i 1
Slot-1 flexaddress enabled = 1
<Structure><Type><Attribuéeparleserveur>
<Attribuéeparlechâssis>
slot1-A1 Gigabit Ethernet 00:1C:23:CD:AC:D2(active)
00:1E:C9:FF:E3:21
iSCSI 00:1C:23:CD:AC:D3(active)
00:1E:C9:FF:E3:22
slot1-A2 Gigabit Ethernet 00:1C:23:CD:AC:D4(active)
00:1E:C9:FF:E3:23
iSCSI 00:1C:23:CD:AC:D5(active)
00:1E:C9:FF:E3:24
slot1-B1 Gigabit Ethernet 00:1D:09:71:B3:60
00:1E:C9:FF:E3:25(active)
iSCSI 00:1D:09:71:B3:61
00:1E:C9:FF:E3:26(active)
slot1-B2 Gigabit Ethernet 00:1D:09:71:B3:62
00:1E:C9:FF:E3:27(active)
iSCSI 00:1D:09:71:B3:63
00:1E:C9:FF:E3:28(active)
slot1-C1 Fibre Channel 4 10:00:00:00:C9:63:51:0E
20:01:00:1E:C9:FF:E3:29(active)
slot1-C2 Fibre Channel 4 10:00:00:00:C9:63:51:0D
20:02:00:1E:C9:FF:E3:29(active)
getioinfo

Description
Affichedesinformationsgénéralessurlesmodulesd'E/Ssurlechâssis.

Utilisation
racadm getioinfo

Exemple
racadm getioinfo
<E/S><Nom><Type><présence><POST><Alim>
switch-1EthernetPassthroughGigabitEthernetPresent
OK ON
switch-2N/ANoneNotPresent
N/A N/A
switch-3 N/A None Not Present
N/A N/A
switch-4N/ANoneNotPresent
N/A N/A
switch-5N/ANoneNotPresent
N/A N/A
switch-6N/ANoneNotPresent
N/A N/A
REMARQUE:Vousdevezdisposerduprivilèged'Utilisateur d'ouverture de session CMC pour pouvoir utiliser cette sous-commande.
REMARQUE:Letypedestructurepeutêtren'importequeltypedestructureE/Sprisencharge,commeEthernet,FibreChanneletInfiniband.