Users Guide
Racdump には、以下のサブシステムが含まれ、以下の RACADM コマンドをincludes the following subsystems and aggregates the following RACADM commands:
使用方法
racadm racdump
例
racadm racdump
===============================================================================
GeneralSystem/RACInformation
===============================================================================
CMCInformation:
CMCDate/Time=Wed,28Nov200711:55:49PM
PrimaryCMCVersion=X08
StandbyCMCVersion=N/A
LastFirmwareUpdate=WedNov2121:37:562007
HardwareVersion=2
CurrentIPAddress=10.35.155.160
CurrentIPGateway=10.35.155.1
CurrentIPNetmask=255.255.255.0
DHCPEnabled=1
MACAddress=00:55:AB:39:10:0F
CurrentDNSServer1=0.0.0.0
CurrentDNSServer2=0.0.0.0
DNSServersfromDHCP=0
RegisterDNSCMCName=0
DNSCMCName=cmc-servicetag
CurrentDNSDomain=
ChassisInformation:
SystemModel=PowerEdgeM1000eControlPanel
SystemAssetTag=00000
ServiceTag=
ChassisName=DellRackSystem
ChassisLocation=[UNDEFINED]
PowerStatus=ON
===============================================================================
SessionInformation
===============================================================================
TypeUserIPAddressLoginDate/Time
SSHroot10.9.72.25211/28/200723:40:53
KVMroot169.254.31.3011/28/200718:44:51
===============================================================================
SensorInformation
===============================================================================
<センサーの種類> <番号> <センサー名> <ステータス> <測定値> <単位> <lc> <uc>
FanSpeed 1 Fan-1 OK 14495 rpm 7250 14500
FanSpeed 2 Fan-2 OK 14505 rpm 7250 14500
FanSpeed 3 Fan-3 OK 4839 rpm 2344 14500
FanSpeed 4 Fan-4 OK 14527 rpm 7250 14500
FanSpeed 5 Fan-5 OK 14505 rpm 7250 14500
FanSpeed 6 Fan-6 OK 4835 rpm 2344 14500
サブシステム
RACADM コマンド
システム / RAC の一般情報
getsysinfo
セッション情報
getssinfo
センサー情報
getsensorinfo
スイッチ情報(IO モジュール)
getioinfo
メザニンカード情報(ドーターカード)
getdcinfo
すべてのモジュール情報
getmodinfo
電力バジェット情報
getpbinfo
KVM 情報
getkvminfo
NIC 情報(CMC モジュール)
getniccfg
冗長性情報
getredundancymode
トレースログ情報
gettracelog
RAC イベントログ
gettraclog
システムイベントログ
getsel