Users Guide

To display the iSCSI MAC for a specific server, use the following RACADM command:
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
To display the user-defined MAC and WWN address, use the following RACADM command:
racadm getmacaddress -c io-identity
racadm getmacaddress -c io-identity -m server -2
To display Ethernet and iSCSI MACS addresses of all LOMs or mezzanine cards, use the following
RACADM command:
racadm getmacaddress -a
To display the console assigned MAC/WWN of all LOMs or mezzanine cards, use the following RACADM
command:
racadm getmacaddress -c all
To display the chassis assigned WWN/MAC address, use the following RACADM command:
racadm getmacaddress -c flexaddress
To display the MAC/WWN addresses for all LOMs or mezzanine cards, use the following RACADM
command:
racadm getmacaddress -c factory
For more information on the getflexaddr and getmacaddress subcommand, see the Dell Chassis
Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide.
138