Reference Guide

The gateway IPv4 address used for static assignment of the RAC IP address. This
property is only valid if cfgNicUseDhcp is set to 0 (FALSE).
NOTE: This parameter is only configurable if the cfgNicUseDhcp parameter is
set to 0 (FALSE).
Legal Values String representing a valid gateway IPv4 address. For example: 192.168.0.1.
Default 192.168.0.1
cfgNicMacAddress (Read Only)
Description The CMC NIC MAC address in the format:
dd:dd:dd:dd:dd:dd, where d is a hexadecimal digit in range
0 - 9, A - F
Legal Values String representing CMC NIC MAC address.
Default The current MAC address of CMC NIC. For example,
00:12:67:52:51:A3.
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for e-mail alerts.
This group enables/disables and configures firmware updates, NTP, remote syslogging, and SMTP email alerting.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read/Write)
Description Enables or disables CMC firmware update from a network
TFTP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
cfgRhostsFwUpdateIpAddr (Read/Write)
Description Specifies the network TFTP server IPv4 or IPv6 address
that is used for TFTP CMC firmware update operations.
Legal Values A string representing a valid IPv4 or IPv6 address. For
example, 192.168.0.61
Default For IPv4, it is 0.0.0.0
103