Reference Guide

uses the values cfgAdGlobalCatalog1,
cfgAdGlobalCatalog2, and cfgAdGlobalCatalog3.
Legal Values
• 0(FALSE)—use pre‑configured Global Catalog Servers
(GCS)
• 1(TRUE)—use DNS to look up GCS
Default 0
cfgADSpecifyServerEnable
Description Allows you to enable or disable and specify an LDAP
server or a global catalog server. Use
cfgADDomainController or cfgADGlobalCatalog to specify
the IP address.
Legal Values
• 1 (enabled)
• 0 (disabled)
Default 0
cfgLDAP
This group allows you to configure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
NOTE: For CMC, you can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
The following sections provide information about the objects in the cfgLDAP group.
cfgLdapEnable (Read/Write)
Description Turns LDAP service on or off.
If this property is disabled, local CMC authentication is
used for user logins.
NOTE: For CMC, enabling this option turns off
cfgADEnable.
Legal Values
• 1 (TRUE)— Enable
• 0 (FALSE)— Disable
Default 0
cfgLdapServer (Read/Write)
Description
Configures the address of the LDAP Server. IPv4 and IPv6
are supported.
129