Reference Guide

To use this subcommand, you must have the Login User
privilege.
Synopsis
racadm getled -m <module>
Input CMC only options:
-m < module > — Specifies the module whose LED settings
you want to view.
< module > can be one of the following:
• server-n where n=1–4
• switch-n where n=1
• chassis
• CMC active
Example For CMC:
• racadm getled -m server-10
< module > < LED state > server-10 Blinking
• racadm getled -m chassis
< module > < LED state > server-10 Not blinking
• racadm getled -m server-1
< module > < LED state > server-1 ON
• racadm getled -m server-9
< module > < LED state > server-9 Extension(1)
getmacaddress
Description Displays the MAC/WWN addresses for all modules or for a specified module.
To use this subcommand, you must have the CMC Login User privilege.
Synopsis
• racadm getmacaddress [-m <module>] [-t iscsi] [-x]
• racadm getmacaddress [-a]
Input
• -m < module > — Specifies the module whose MAC address you want to view.
< module > may be one of the following:
server-n, where n =1–4
switch-n, where n =1
• -t — Displays the iSCSI MAC addresses for all servers or the specified server if used with -m
option.
• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and
must be used with -m option.
• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine
cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned
MAC/WWN address is displayed.
Example
Display iSCSI MAC addresses for all servers.
racadm getmacaddress -t iscsi
39