Reference Guide

racdump

Description This subcommand displays the comprehensive chassis

status and configuration state information, and historic

event logs. Used for post-deployment configuration

verification and during debugging sessions.

To use this subcommand for CMC, you must have the

Administrator privilege.

Synopsis

racadm racdump

Input Racdump includes the following subsystems and

aggregates the following RACADM commands:

• General System/RAC information - getsysinfo

• Session information - getssinfo

• Sensor information - getsensorinfo

• Switches information (IO Module) - getioinfo

• Mezzanine card information (Daughter card) -

getdcinfo

• All modules information - getmodinfo

• Power budget information - getpbinfo

• KVM information - getkvminfo

• NIC information (CMC module) - getniccfg

• Redundancy information - getredundancymode

• Trace log information - gettracelog

• RAC event log - getraclog

• System event log - getsel

Output The following information is displayed when the

racdumpsubcommand is processed:

• General system/RAC information

• Coredump

• Session information

• Process information

• Firmware build information

Example

racadm racdump

===============================================================================

General System/RAC Information

===============================================================================

CMC Information:

CMC Date/Time = Wed, 28 Nov 2007 11:55:49 PM

Active CMC Version = X08

Standby CMC Version = N/A

Last Firmware Update = Wed Nov 21 21:37:56 2007

Hardware Version = 2

Current IP Address = 10.35.155.160

Current IP Gateway = 10.35.155.1

Current IP Netmask = 255.255.255.0