Reference Guide

racadm raid unblink -vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.

1-1,Disk.Virtual.0:RAID.ChassisIntegrated.1-1

init

Description

Starts an initialization operation on the specified virtual drive.

Synopsis

racadm raid init:<VD FQDD> -speed {fast | full} {-current | -

pending}

Input

• –current <optional>: Performs the configuration right now.

NOTE: If this requires the system to reboot it will reboot then.

• –pending: Save the configuration change for a later application. You can use a combination of

the –pending and –current flags on multiple commands to reduce the possible number of system

reboots.

• –speed{fast | full}: Perform a fast or full (slow) initialization on the virtual drive.

Example

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed

fast

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed

full

raid

Description Monitors, retrieves inventory, and configures the storage components connected to the

chassis.

NOTE: To use this subcommand, you must have the Chassis Administrator privilege.

Synopsis

racadm raid get status

racadm raid get <Object type>

racadm raid get <Object type> -o

racadm raid get <Object type> -o -p <property names

separated by comma>

racadm raid get <Object type>:<FQDD's of Object type

separated by comma>

racadm raid set <Set Operation>:<FQDD of Object type>

racadm raid set <Set Operation> -pdkey:<FQDD of PD>

racadm raid set <Set Operation> -vdkey:<FQDD of VD>

Input

NOTE: Maximum property names that can be specified in –p option is 10.

NOTE: Maximum FQDDs that can be specified is 3.

• (Object type) — controllers, vdisks, pdisks.

• Set Operation

– resetconfig