Reference Guide

property is only valid if cfgNicVLanEnable is set to 1

(enabled).

Legal Values 1 – 4000 and 4021 – 4094

Default 1

Example

racadm config -g cfgLanNetworking -o

cfgNicVlanID

cfgDNSDomainNameFromDHCP (Read/Write)

Description Specifies that the DNS domain name should be assigned

from the network DHCP server.

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default 0

This property is used only if cfgNicUseDhcp is set to 1 (true), or if both cfgIPv6Enable and cfgIPv6AutoConfig are set

to 1 (true).

The CMC can obtain its DNS domain name from either a DHCP or DHCPv6 server, if all of the following properties are set

to 1 (true):

• cfgNicIPv4Enable

• cfgNicUseDhcp

• cfgIPv6Enable

• cfgIPv6AutoConfig

• cfgDNSDomainNameFromDHCP

• cfgDNSDomainName (Read/Write)

The network administrator must make sure that these DHCP servers are configured to provide the same DNS domain

name to the CMC, otherwise the domain name becomes unpredictable.

cfgDNSDomainName (Read/Write)

Description This is the DNS domain name. This parameter is valid only

if cfgDNSDomainNameFromDHCP is set to 0 (FALSE).

Legal Values A string of up to 254 ASCII characters. At least one of the

characters must be alphabetic. Characters are restricted

to alphanumeric, '-', and '.'.

NOTE: Microsoft Active Directory supports only Fully

Qualified Domain Names (FQDN) of 64 bytes or

fewer.

Default <

blank