Reference Guide

A login from the incoming IP address is allowed only if
both of the following are identical:
• cfgRacTuneIpRangeMask bit-wise and with
incoming IP address
• cfgRacTuneIpRanbeMask bit-wise and with
cfgRacTuneIpRangeAddr.
Legal Values An IPv4 address formatted string, for example,
255.255.255.0.
Default 255.255.255.0
cfgRacTuneIpBlkEnable (Read/Write)
Description Enables or disables the IPv4 address blocking feature.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRacTuneIpBlkFailCount (Read/Write)
Description The maximum number of login failures to occur within the
window (cfgRacTuneIpBlkFailWindow) before login
attempts from the IP address are rejected.
Legal Values 2 – 16
Default 5
cfgRacTuneIpBlkFailWindow (Read/Write)
Description Defines the time span in seconds that the failed attempts
are counted. When failure attempts age beyond this limit,
they are dropped from the count.
Legal Values
2–65535
Default 60
cfgRacTuneIpBlkPenaltyTime (Read/Write)
Description Defines the time span in seconds that session requests
from an IP address with excessive failures are rejected.
Legal Values
2–65535
Default 300
cfgRacTuneSshPort (Read/Write)
Description
Specifies the port number used for the SSH interface.
Legal Values
10–65535
116