Reference Guide

cfgNicCurrentIPv4Enabled
Description Indicates whether IPv4 is enabled on the CMC. If the
current property value is set to 0 (false), the remote
network interfaces to the CMC are not accessible over
IPv4.
Legal Values
Default
Example
racadm getconfig -g cfgCurrentLanNetworking
# cfgNicCurrentIPv4Enabled=1
# cfgNicCurrentIpAddress=143.166.152.116
# cfgNicCurrentNetmask=255.255.255.0
# cfgNicCurrentGateway=143.166.152.1
# cfgNicCurrentDhcpWasUsed=0
# cfgNicCurrentVlanEnable=0
# cfgNicCurrentVlanID=1
# cfgNicCurrentVlanPriority=0
# cfgDNSCurrentServer1=192.168.0.5
# cfgDNSCurrentServer2=192.168.0.6
# cfgDNSCurrentDomainName=MYDOMAIN
cfgNicCurrentIpAddress
Description Displays the static IP address to the CMC.
Legal Values
Default
cfgNicCurrentNetmask
Description Displays the static subnet mask for the CMC IP address.
Legal Values
Default
cfgNicCurrentGateway
Displays the static gateway for the CMC IP address.
Description Displays the static gateway for the CMC IP address.
Legal Values
Default
cfgNicCurrentDhcpWasUsed
Description
Indicates whether DHCP is used to configure the NIC.
Legal Values 0 – address is static.
1– address was obtained from the DHCP server.
146