Reference Guide

NOTE: Currently, these commands are supported only in remote racadm.
Synopsis
racadm get -f <filename>
Input –f : save event filter configurations to a file.
Example –Save event filter configurations to a file by using remote racadm.
racadm -r 10.94.161.119 -u root -p calvin get -f config.txt
getactiveerrors
Description
Displays the active errors in a chassis.
To run this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm getactiveerrors [-s <severity> ] [-m <module>]
Input
valid values for <severity>: critical, warning, info
valid values for <module>: server-n, where n = 1 to 4
switch-n, where n = 1
cmc-n, where n = 1, 2
fan-n, where n = 1 to 6
ps-n, where n = 1 to 4
chassis
kvm
Output
Display entire log:
racadm getactiveerrors
- Display specific module log:
racadm getactiveerrors -m server-1
- Display entire informational log:
racadm getactiveerrors -s info
getassettag
Description Displays the asset tag for the chassis.
To use this subcommand, you must have the CMC Login
User privilege.
Synopsis
racadm getassettag [-m <module>]
Input -m < module > — Specifies the module whose asset tag
you want to view.
Legal value: chassis
Example
• racadm getassettag -m chassis
• racadm getassettag
chassis 78373839–33
34