Reference Guide

Therefore, if a file name is provided, an index is appended to the end of the file name
such as LicenseFile0.xml, LicenseFile1.xml, and so on. In this case, the device is an
embedded CMC:
racadm license export -u root -p calvin -f
LicenseFile.xml -l //192.168.2.140/licshare -c
cmc.embedded.1
• Delete a license:
– Delete licenses on a particular device. For example. Embedded CMC:
racadm license delete -c cmc.embedded.1
– Delete license using an entitlement ID. For example, xYZabcdefg
racadm license delete -e xYZabcdefg
– Delete license using a transaction ID. For example, 2.
racadm license delete -t 2
• Replace a license.
– Replace the license on a device with a license file that is located on an NFS share,
and using a transaction ID. For example, transaction 27.
racadm license replace -f License.xml -l 192.168.2.140:/
licshare -t 27
– Replace license on a device with a license file that is located on a CIFS share and
using a transaction ID. For example, transaction 27.
racadm license replace -u admin -p passwd -f
License.xml -l //192.168.2.140/licshare -t 27
– Replace license on a device with a license file on the local file system.
racadm license replace -f License.xml -t 27
netstat
Description Displays the routing table and the current connections.
To use this subcommand, you must have the Execute
Diagnostic Commands privilege.
Synopsis
racadm netstat
Input
racadm netstat
Output
Kernel IPv6 routing table
Destination
Next
Hop
Flags Metric Ref Use Iface
::
1/128
::
U 0 30 1 lo
fe80::200:ff:fe00:d01/128
::
U 0 0 1 lo
fe80::/64
::
U 256 0 0 eth1
ff00::/8
::
62