Reference Guide
echo packet is sent to the destination IPv6 address on the
basis of current routing-table contents.
To use this subcommand for CMC, you must have the
Administrator privilege.
Synopsis
racadm ping6 <ipv6address>
Example
racadm iping6 10.9.72.254
IPING6 10.9.72.254 (10.9.72.254): 56
data bytes
64 bytes from 10.9.72.254: icmp_seq=0
ttl=121 time=2.9
ms
--- 10.9.72.254 ping statistics ---
1 packets transmitted, 1 packets
received, 0 percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
racdump
Description This subcommand displays the comprehensive chassis
status and configuration state information, and historic
event logs. Used for post-deployment configuration
verification and during debugging sessions.
To use this subcommand for CMC, you must have the
Administrator privilege.
Synopsis
racadm racdump
Input Racdump includes the following subsystems and
aggregates the following RACADM commands:
• General System/RAC information - getsysinfo
• Session information - getssinfo
• Sensor information - getsensorinfo
• Switches information (IO Module) - getioinfo
• Mezzanine card information (Daughter card) -
getdcinfo
• All modules information - getmodinfo
• Power budget information - getpbinfo
• KVM information - getkvminfo
• NIC information (CMC module) - getniccfg
• Redundancy information - getredundancymode
• Trace log information - gettracelog
• RAC event log - getraclog
• System event log - getsel
64