Reference Guide

• <

enabled

> — Sets whether the server's host name is used for display purposes.

Valid values: 0 or 1.

Example

• Set the name of slot 3 as server3:

racadm setslotname -i 3 server3

• Enable system to display host names (1=Active):

racadm setslotname -h 1

setsysinfo

Description Sets the name or location of the chassis.

To use this subcommand, you must have the Administrator

privilege.

Synopsis

racadm setsysinfo [-c chassisname|

chassislocation]

Input

• <

string

> — Indicates a maximum of 64 non-extended

ASCII chassis name or location.

• -c — Sets the chassis name or location.

Example

racadm setsysinfo -c chassisname "Dell

Rack System"

The chassis name was set successfully.

SSH or Telnet RACADM

racadm getconfig -g <groupname> [-o <objectname>]

[-i <indexnumber>]

racadm <subcommand>

Example

racadm getconfig -g idracinfo

racadm getsysinfo