Users Guide

4. In the Chassis Group page, under Role, select None, and then click Apply.
The lead chassis then communicates to all the members that they have been removed from the
group. The lead chassis can be assigned as a leader or member of a new group.
If a network issue prevents contact between the leader and the member, the member chassis may
not receive the message. In this case, disable the member from the member chassis to complete the
removal process.
Disabling an Individual Member at the Member Chassis
Sometimes a member cannot be removed from a group by the lead chassis. This can happen if network
connectivity to the member is lost. To remove a member from a group at the member chassis:
1. Log in with chassis administrator privileges to the member chassis.
2. In the left pane, click Chassis Overview → Setup → Group Administration.
3. Select None, and then click Apply.
Launching the Web page of a Member Chassis or Server
You can access the web page of the member chassis, remote console of the server, or the web page of
the iDRAC server from the lead chassis group page. If the member device has the same login credentials
as the lead chassis, you can use the same credentials to access the member device.
To navigate to member devices:
1. Log in to the lead chassis.
2. Select Group: name in the tree.
3. If a member CMC is the required destination, select Launch CMC for the required chassis.
If a server in a chassis is the required destination:
a) Select the image of the destination chassis.
b) In the chassis image that appears in the Health section, select the server.
c) In the box labeled Quick Links, select the destination device. A new window is displayed with the
destination page or login screen.
Propagating Leader Chassis Properties to Member Chassis
You can apply the properties from the leader to the member chassis of a group. To synchronize a
member with the leader properties:
1. Login with administrator privileges to the leader chassis.
2. Select the Lead chassis in the tree.
3. Click Setup → Group Administration.
4. In the Chassis Properties Propagation section, select one of the propagation types:
– On-Change Propagation — Select this option for automatic propagation of the selected chassis
property settings. The property changes are propagated to all current group members, whenever
lead properties are changed.
– Manual Propagation — Select this option for manual propagation of the chassis group leader
properties with its members. The lead chassis property settings are propagated to group
members only when a lead chassis administrator clicks Propagate.
81