User's Manual

• FlexAddress feature — Replaces the factory-assigned World Wide Name/Media Access Control (WWN/

MAC) IDs with chassis-assigned WWN/MAC IDs for a particular slot, an optional upgrade.

• Graphical display of chassis component status and health.

• Support for single and multi-slot servers.

• LCD iDRAC configuration wizard supports for iDRAC network configuration.

• iDRAC single sign-on.

• Network time protocol (NTP) support.

• Enhanced server summary, power reporting, and power control pages.

• Forced CMC failover and virtual reseat of servers.

• Multi-chassis management, allows up to eight other chassis to be visible from the lead chassis.

• Configure storage components on the chassis.

• Map PCIe slots to the servers and their identification.

Security Features

The CMC provides the following security features:

• Password-level security management — Prevents unauthorized access to a remote system.

• Centralized user authentication through:

– Active Directory using Standard Schema or an Extended Schema (optional).

– Hardware-stored user IDs and passwords.

• Role-based authority — Enables an administrator to configure specific privileges for each user.

• User ID and password configuration through the web interface. Web interface supports 128-bit SSL

3.0 encryption and 40-bit SSL 3.0 encryption (for countries where 128-bit is not acceptable).

NOTE: Telnet does not support SSL encryption.

• Configurable IP ports (if applicable).

• Login failure limits per IP address, with login blocking from the IP address when the limit is exceeded.

• Configurable session auto time out, and more than one simultaneous sessions.

• Limited IP address range for clients connecting to CMC.

• Secure Shell (SSH), which uses an encrypted layer for higher security.

• Single Sign-on, Two-Factor Authentication, and Public Key Authentication.

Chassis Overview

The figure here shows a view of the CMC connectors.