Manualshelf

User's Manual

ManualsBrandsDell ManualsSoftwareDell Chassis Management Controller Version 1.30 for PowerEdge VRTX
81828384858687888990
• CPLD
• USC
• Diagnostics
• OS Drivers
• RAID
• NIC
NOTE: The inventory information displayed for the chassis group, member chassis, servers, and
server components is updated every time a chassis is added or removed from the group.
Viewing Chassis Group Inventory
To view the chassis group using CMC web interface, in the left pane, select Group. Click Properties →
Firmware Version. The Chassis Group Firmware Version page displays all the chassis in the group.
Viewing Selected Chassis Inventory Using Web Interface
To view the selected chassis inventory using CMC Web interface:
1. In the system tree, select Group. click Properties → Firmware Version.
The Chassis Group Firmware Version page displays all the chassis in the group.
2. In the Select a Chassis section, select the member chassis for which you want to view the inventory.
The Firmware View Filter section displays the server inventory for the selected chassis and the
firmware versions of all the server components.
Viewing Selected Server Component Firmware Versions Using Web Interface
To view the firmware versions of selected server components using CMC web interface:
1. In the left pane, select Group. Click Properties → Firmware Version.
The Chassis Group Firmware Version page displays all the chassis in the group.
2. In the Select a Chassis section, select the member chassis for which you want to view the inventory.
3. In the Firmware View Filter section, select Components.
4. In the Components list, select the required component- BIOS, iDRAC, CPLD, USC, Diagnostics, OS
Drive, RAID devices (up to 2), and NIC devices (up to 6), for which you want to view the firmware
version.
The firmware versions of the selected component for all the servers in the selected member chassis
are displayed.
Configuring Multiple CMCs Using RACADM
Using RACADM, you can configure one or more CMCs with identical properties.
When you query a specific CMC card using its group ID and object ID, RACADM creates the racadm.cfg
configuration file from the retrieved information. By exporting the file to one or more CMCs, you can
configure your controllers with identical properties in a minimal amount of time.
84