Reference Guide

cfgRhostsSyslogServer3 (Read/Write)
Description Specifies the third of three possible remote syslog servers
to store the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default < blank >
cfgRhostsSyslogPowerLoggingEnabled
Description Enables or disables power consumption logging to remote
syslog servers.
NOTE: Remote syslog must be enabled and one or
more remote syslog servers must be configured for
power consumption to be logged.
Legal Values
• 1 (enabled)
• 0 (disabled)
Default 0
cfgRhostsSyslogPowerLoggingInterval
Description Specifies the power consumption collection/logging interval.
Legal Values 1–1440 (minutes)
Default 5
Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
cfgRhostsSyslogServer1=
cfgRhostsSyslogServer2=
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5
cfgUserAdmin
This group provides configuration information about the users who are allowed to access CMC through the available
remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
105