Reference Guide

Examples
racadm getconfig -g cfgAlerting -o cfgAlertingSourceEmailName
racadm config -g cfgAlerting -o cfgAlertingSourceEmailName [e-mail]
Object value modified successfully.
cfgIPv6LanNetworking
This group is used to configure the IPv6 over LAN networking capabilities.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read/Write)
Description Enables or disables the IPv6 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgIPv6AutoConfig (Read/Write)
Description Enables or disables the IPv6 Auto Configuration option.
NOTE: If this value is set to 0, the CMC disables auto
configuration and statically assigns IPv6 addresses.
If this value is set to 1, the CMC obtains address and
route information using stateless auto configuration
and DHCPv6.
NOTE: The CMC uses its MAC address for its DUID
(DUID-LL) when communicating with a DHCPv6
server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
1
143