Reference Guide

<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
<Server#> <Presence> <DC1 Type> <DC1 State> <DC2 Type> <DC2 State>
server-1 Present PCIe OK PCIe OK
server-2 Not Present None N/A None N/A
server-3 Present PCIe OK None N/A
server-4 Not Present None N/A None N/A
getdcinfo -n
<Server#> <Presence> <DC1 Model Name> <DC2 Model Name>
server-1 Present None None
server-2 Not Present None None
server-3 Not Present None None
server-4 Present None Broadcom M5708t
getflexaddr
Description Displays enabled or disabled status for the entire chassis.
If used with -i, the command displays MACs/WWN on a
per-slot–basis.
To use this subcommand, you must have CMC Login User
privilege.
NOTE: If FlexAddress is not activated on the chassis,
the command displays server-assigned MAC/WWN
addresses. If the slot is empty, the command leaves
the server-assigned MAC/WWN addresses blank. If
an external console controls the MAC/WWN
addresses, the command displays an externally
managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i < slotNum > — Specifies the slot information to be
displayed. < slotNum > must be from 1 to 4.
Example
Display current FlexAddress settings for all the slots and fabrics.
racadm getflexaddr
36