Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.35 for Dell PowerEdge VRTX

IPv4 Enabled = 1

DHCP Enabled = 1

Static IP Address = 192.168.0.120

Static Subnet Mask = 255.255.255.0

Static Gateway = 192.168.0.1

Current IP Address = 10.36.0.12

Current Subnet Mask = 255.255.254.0

Current Gateway = 10.36.0.1

IPv6 Enabled = 0

Autoconfiguration Enabled = 1

Static IPv6 Address = ::/64

Static IPv6 Gateway = ::

Link Local Address = ::

Current IPv6 Address 1 = ::

Current IPv6 Gateway = ::

Speed = Autonegotiate

Duplex = Autonegotiate

VLAN Enable = 0

VLAN ID = 1

VLAN priority = 0

racadm getniccfg -m server-1

LOM Model Name = BRCM 10GbE 2P 57810s bNDC

LOM Fabric Type = 10 GbE KR

IPv4 Enabled = 1

DHCP Enabled = 1

IP Address = 10.35.0.159

Subnet Mask = 255.255.255.0

Gateway = 10.35.0.1

IPv6 Enabled = 0

Autoconfiguration Enabled = 0

Link local Address =

IPv6 Gateway = ::

VLAN Enable = 0

VLAN ID = 1

VLAN priority = 0

racadm getniccfg -m switch-1

DHCP Enabled = 1

IP Address = 10.35.155.223

Subnet Mask = 255.255.255.0

Gateway = 0.0.0.0

Output

The getniccfg subcommand displays an appropriate error message if the operation is not successful. Otherwise, the

output is displayed in the following format:

43