Reference Guide

Example

$ racadm ifconfig

eth0 Link encap:Ethernet HWaddr

00:1D:09:FF:DA:23

inet addr:10.35.155.136

Bcast:10.35.155.255

Mask:255.255.255.0

UP BROADCAST RUNNING

MULTICAST MTU:1500

Metric:1

RX packets:2550665

errors:0 dropped:0 overruns:0

frame:0

TX packets:0 errors:0

dropped:0 overruns:0

carrier:0

collisions:0 txqueuelen:

1000

RX bytes:272532097

(259.9 MiB) TX bytes:0

(0.0 B)

jobqueue

Description Displays the jobs in that are currently being run, delete the jobs, and create a job.

NOTE: To view the jobs, you must have CMC Login User privilege.

NOTE: To delete the jobs, you must have Chassis Configuration Administrator

privilege.

Synopsis

racadm jobqueue view

racadm jobqueue delete

racadm jobqueue create

Input

• —i — Specifies the JobID that is displayed or deleted.

• – –all — The JobIDs that are not applied are deleted.

• <fqdd> — Specifies an FQDD for which a job has to be created.

• reboot type — Specifies a reboot type. Valid options are none: No Reboot Job which

is the default.

• start time — Specifies a start time for job to be scheduled in yyyymmddhhmmss

format. If you specify TIME_NOW, the job is immediately run.

• Expiration time — Specifies the expiry time for the job to complete in

yyyymmddhhmmss format. If you specify TIME_NA, the wait-time is not applicable for

the job.

Example

• Display all the jobs:

-------------------------JOB

QUEUE------------------------

[Job ID=RID_853106266329]