Reference Guide

This command displays all battery keys connected to the controllers referred to as refkeys.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o

This command is an optimized version and displays all battery objects for the controller FQDD.

racadm raid get batteries --refkey <controller FQDDs

separated by comma

> -o -p <property names separated by comma>

This command is an optimized and filtered version.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o -p <property names separated by comma>

• Monitor and Inventory all virtual disks connected to the controller

racadm raid get vdisks --refkey <controller FQDDs

separated by comma

This command displays all vdisk keys connected to the controllers being mentioned as refkeys.

racadm raid get vdisks --refkey <controller FQDDs

separated by comma

> -o

This command is an optimized version and displays all vdisk objects for the controller FQDD.

racadm raid get <controller > -pending

Raid.Integrated.1-1

Raid.Slot.2-1

• Monitor and Inventory all storage enclosures connected to the connector

racadm raid get enclosures --refkey <connector FQDDs

separated by comma

This command displays all enclosure keys connected to the connectors being mentioned as refkeys.

racadm raid get enclosures --refkey <connector FQDDs

separated by comma > -o optimized version.

This command displays all enclosure objects for the connector FQDD.

racadm raid get enclosures --refkey <connector FQDDs

separated by comma > -o -p <property names separated by comma>

This command is an optimized and filtered version.

• Monitor and Inventory all Physical Disks connected to the enclosure /Backplanes

racadm raid get pdisks --refkey <enclosure/Backplane

FQDDs separated by comma>

This command displays all physical disk keys connected to the enclosures being mentioned as refkeys.

racadm raid get pdiks --refkey <enclosure/Backplanes

FQDDs separated by comma > -o

This command is an optimized version and displays all disk objects for the enclosure FQDD.

racadm raid get pdisks --refkey <enclosure/Backplanes

FQDDs separated by comma > -o -p <property names separated by comma>

optimized and filtered version.

• Monitor and Inventory all Fans connected to the enclosure

racadm raid get fans --refkey <enclosure FQDDs separated

by comma>

This command displays all fan keys connected to the enclosures referred as refkeys.

racadm raid get fans --refkey <enclosure FQDDs separated

by comma > -o optimized version.