Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 1.35 for Dell PowerEdge VRTX

• racadm raid get vdisks -o -p layout,status

• racadm raid get controllers:RAID.ChassisIntegrated.1-1

• racadm raid get controllers:RAID.ChassisIntegrated.1-1 -p

status

• racadm raid resetconfig:RAID.ChassisIntegrated.1-1

• racadm raid exportlog:RAID.ChassisIntegrated.1-1 -l <CIFS

or NFS share> -u <user name> -p <password> [-f <filename>]

• racadm raid forceonline:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

• racadm raid deletevd:Disk.Virtual.0:RAID.ChassisIntegrated.

1-1

• racadm raid blink:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

• racadm raid clearconfig:RAID.ChassisIntegrated.1-1

• racadm raid importconfig:RAID.ChassisIntegrated.1-1

• racadm raid ccheck:Disk.Virtual.0:RAID.ChassisIntegrated.

1-1

• racadm raid cancelcheck:Disk.Virtual.

0:RAID.ChassisIntegrated.1-1 {-pdkey:<comma separated PD

FQDDs> | {-vdkey:<comma separated VD FQDDs>}

• racadm raid unblink {-pdkey:<comma separated PD FQDDs> | -

vdkey:<comma separated VD FQDDs>}

• racadm raid patrolread:RAID.ChassisIntegrated.1-1 [-mode

{auto | manual | disabled}] [-state {start | stop}] racadm

raid hotspare:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1 -assign {yes | no} -type

{ ghs | dhs} -vdkey:<FQDD of VD>

• racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

-speed { fast | full } racadm raid cancelinit:Disk.Virtual.

0:RAID.ChassisIntegrated.1-1 racadm raid assignva:<VA FQDD>

-vdkey:<FQDD of VD> -accesspolicy { na | rw }

• racadm raid createvd:RAID.ChassisIntegrated.1-1 -rl {r0|r1|

r5|r6|r10|r50|r60} [-wp {wt|wb}] [-rp {nra|ra|ara}] [-ss

{1k|2k|4k|8k|16k|32k|64k|128k|256k|512k|1M|2M|4M|8M|16M}] -

pdkey:<comma separated PD FQDDs>

• [-dcp {enabled|disabled|default}] [-name <VD name>] [-size

<VD size> {b|k|m|g|t}] [-cc]

• racadm raid discardcache:RAID.ChassisIntegrated.1-1

• racadm raid changepolicy:Disk.Virtual.

0:RAID.ChassisIntegrated.1-1 -wp {wt|wb} -rp {nra|ra|ara} -

dcp {enabled|disabled|default} racadm raid

rename:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -name <VD

name>

• racadm raid ctrlprop:RAID.ChassisIntegrated.1-1 [-rebuild

<value>>] [-bgi <value>] [-reconstruct <value>] [-

checkconsistency <value>] [-ccmode {abortonerror | normal}]

[-copybackmode {off | on | onwithsmart}] [-lb {auto |

disabled}] [-prunconfigured {yes | no}] racadm raid

rebuild:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1 racadm raid

cancelrebuild:Disk.Bay.0:Enclosure.Internal.

0-0:RAID.ChassisIntegrated.1-1

raid

Description

Allows you to execute commands to control RAID arrays.