Reference Guide

— Setting the time using the -l and -z options is
recommended. This command format allows the CMC
to fully support local time zones, including the ability to
automatically adjust the CMC time to the local
Daylight Savings Time.
Example The setractime subcommand supports dates ranging from
1/1/1970 00:00:00 through 12/31/2030 23:59:59. To set the
local time to October 24, 2007 at 3:02:30 PM:
racadm setractime -l 20071024150230
The time was set successfully.
setslotname
Description
Sets the name of the server slot and enables the feature to display the host name (if
available) of all the four server slots, or of a specified slot (indicated by the server slot
number) in the chassis. Optionally, use this command to set whether the server slot
name or host name is displayed in the CMC Web interface or with the getslotname -i
< slot Num > command. If the host name is not available, the static server slot name is
used.
To use this subcommand, you must have the Administrator privilege.
NOTE: The OMSA server agent must be present and running on the server to use
the Display Hostname feature. If the agent is not running, the setting is ignored.
For more information, see the Dell OpenManage Server Administrator User's
Guide at support.dell.com/manuals.
Synopsis
racadm setslotname [-i <slotNum> <slotname> | -h 0|1]
racadm setslotname -h <enabled>
Input
• < slotNum > — Specify the slot number in the chassis. Valid values: 1 to 4.
• < slotname > — The new name to be assigned to the slot.
• < enabled > — Sets whether the server's host name is used for display purposes.
Valid values: 0 or 1.
Example
• Set the name of slot 3 as server3:
racadm setslotname -i 3 server3
• Enable system to display host names (1=Active):
racadm setslotname -h 1
setsysinfo
Description Sets the name or location of the chassis.
To use this subcommand, you must have the Administrator
privilege.
Synopsis
racadm setsysinfo [-c chassisname|
chassislocation]
<string>
87