Reference Guide

Example
racadm sslcsrgen -s
or
racadm sslcsrgen -g -f c:\csr
\csrtest.txt
NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM cfgRacSecurity group.
For example: racadm config -g cfgRacSecurity -o cfgRacSecCsrCommonName MyCompany
NOTE: In telnet/ssh console, you can only generate and not download the CSR file.
sslresetcfg
Description Restores the web-server certificate to factory default and
restarts web-server. The certificate takes effect 30
seconds after the command is entered.
To use this subcommand, you must have the Chassis
Configuration Administrator privilege for CMC.
Synopsis
racadm sslresetcfg
Example
$ racadm sslresetcfg
Certificate generated successfully and
webserver restarted.
testemail
Description Sends a test e-mail to a specified destination. Prior to executing the test e-mail
command, make sure that the SMTP server is configured and the specified index in the
RACADM cfgEmailAlert group is enabled and configured properly.
Synopsis
racadm testemail -i <index>
Input -i — Specifies the index of the e-mail alert to test.
Output
Success: Test e-mail sent successfully
Failure: Unable to send test e-mail
Example Commands for the cfgEmailAlert group:
• Enable the alert —
racadm config -g cfgEmailAlert -o cfgEmailAlertEnable -
i 1
• Set the destination e-mail address —
racadm config -g cfgEmailAlert -o cfgEmailAlertAddress -
i 1 [e-mail]
• Set the custom message that is sent to the destination e-mail address —
racadm config -g cfgEmailAlert -o
cfgEmailAlertCustomMsg -i 1 "This is a test!"
• Make sure that the SMTP IP address is configured properly —
racadm config -g cfgRemoteHosts -o
cfgRhostsSmtpServerIpAddr 192.168.0.152
92