Connectivity Guide

NOTE: The PowerEdge M1000e CMC, PowerEdge VRTX CMC and PowerEdge FX2 CMC do not generate the traps in
this section. They generate the traps documented in the CMC Traps.
Table 123. RAC Traps
TrapID Name Description Severity Category Cause Supported
by RAC
Platform
0 CodeStart SNMP agent is
initializing itself
Information Status RAC power on or reset. All
1 Authentication Failure Request
received with an
invalid community
name
Critical Error SNMP request with an invalid
community name.
All
1001 alertDrscTest
TrapEvent
The RAC
generated a test
trap event in
response to a user
request
Information Status A test SNMP trap generated by
a RAC.
All
1002 alertDrscAuth
Error
RAC
Authentication
failures during a
time period have
exceeded a
threshold
Minor Error RAC login failure caused by
authentication failure, number of
concurrent logins exceed limit, or
permission denied.
All
1015 alertDrscSEL Warning The RAC
has detected a
new event in the
System Event Log
with Severity:
Warning
Major Error RAC detected a new system
event log with warning severity
(detailed log info is in drsAlert
Message varbind).
All
1016 alertDrscSEL Critical The RAC
has detected a
new event in the
System Event Log
with Severity:
Critical
Critical Error RAC detected a new system
event log with critical severity
(detailed log info is in drsAlert
Message varbind).
All
1017 alertDrscSEL
80 percentFull
The RAC system
event log is 80%
full
Major Status RAC detected system event log
is 80% full.
All
1018 alertDrscSEL
90 percentFull
The RAC system
event log is 90%
full
Major Status RAC detected system event log
is 90% full.
All
1018 alertDrscSEL
90 percentFull
The RAC system
event log is 90%
full
Major Status RAC detected system event log
is 90% full.
All
1020 alertDrscSEL
Normal
The RAC has
detected a new
event in the
System Event Log
Information Error RAC detected a new system
event log with normal severity
(detailed log info is in drsAlert
Message varbind).
All
32