Connectivity Guide

Description This property is applicable to SSD media type only. This indicates the wear-out
percentage of the SSD. Typically it is a value between 0 to 100. However, if the
value is not available or not applicable (in the case of HDD media type) the value
will be 255.
Syntax INTEGER
Access read-only
Table 268. Physical Disk Power State
Name
physicalDiskPowerState
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.49
Description The power state of the physical disk. Possible Values:
1. Not one of the following.
2. The physical disk is in the spun up state.
3. The physical disk is in the spun down state.
4. The physical disk is changing from spun down state to spun up state or
vice versa.
5. The Solid State Device (SSD) is powered on.
Syntax INTEGER
Access read-only
Table 269. Physical Disk Power State
Name
physicalDiskPowerState
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.50
Description The state of the physical disk when there are progressive operations ongoing.
Possible Values:
1. There is no active operation running.
2. Data from a redundant virtual disk is currently being rebuilt onto the
physical disk.
3. Data on the disk is being erased.
4. Data is being copied from a hot spare disk to the physical disk or vice
versa.
Syntax INTEGER
Access read-only
Table 270. Physical Disk Progress
Name
physicalDiskProgress
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.51
Description The progress percentage of the operation that is being performed on the
physical disk. This is applicable only if there is a progressive operations ongoing
Syntax INTEGER
Access read-only
70