Connectivity Guide
Trap Variables
This section lists the six variables that are sent with iDRAC traps to provide additional information about a trap or alert generated by
some event on the system. The trap variables presented here apply to all iDRAC7 and iDRAC8 traps. The trap variables are sent in
the order listed and are reserved for use only in traps.
Table 365. Alert Message ID
Variable Name
alertMessageID
Object ID 1.3.6.1.4.1.674.10892.5.3.1.1.0
Description Message ID of the event.
Syntax DisplayString
Access Read-only
Table 366. Alert Message
Variable Name
alertMessage
Object ID 1.3.6.1.4.1.674.10892.5.3.1.2.0
Description Message describing the alert.
Syntax StringType
Table 367. Alert Current Status
Variable Name
alertCurrentStatus
Object ID 1.3.6.1.4.1.674.10892.5.3.1.3.0
Description Current status of object causing the alert, if applicable.
Syntax ObjectStatusEnum
Access Read-only
Table 368. Alert System Service Tag
Variable Name
alertSystemServiceTag
Object ID 1.3.6.1.4.1.674.10892.5.3.1.4.0
Description Service tag of the system.
Syntax DisplayString
Table 369. Alert System FQDN
Variable Name
alertSystemFQDN
Object ID 1.3.6.1.4.1.674.10892.5.3.1.5.0
Description Fully qualied domain name of the system.
Syntax StringType
Table 370. Alert FQDD
Variable Name
alertFQDD
Object ID 1.3.6.1.4.1.674.10892.5.3.1.6.0
Description Fully qualied device descriptor of the device.
Syntax DisplayString
93