Reference Guide
cfgADDcSRVLookupDomainName (Read/Write)
Description This is the Active Directory Domain to use when cfgAddcSrvLookupbyUserDomain is set to 0.
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupDomainName (Read/Write)
Description This is the Active Directory Domain to use when cfgAddcSrvLookupbyUserDomain is set to 0.
Legal Values String. Maximum length = 254
Default Null
cfgADDcSRVLookupEnable (Read/Write)
Description Congures CMC to use pre‑congured domain controllers or to use DNS to nd the domain
controller. If using pre‑congured domain controllers, then the domain controllers to use are
specied under cfgAdDomainController1, cfgAdDomainController2, and
cfgAdDomainController3. CMC does not fail over to the specied domain controllers when DNS
lookup fails or none of the servers returned by the DNS lookup works.
Legal Values
• 1 (TRUE)—use DNS to look up domain controllers
• 0 (FALSE)—use pre‑congured domain controllers
Default 0
cfgADSpecifyServerEnable
Description
Allows you to enable or disable and specify an LDAP server or a global catalog server. Use
cfgADDomainController or cfgADGlobalCatalog to specify the IP address.
Legal Values
• 1 (enabled)
• 0 (disabled)
Default 0
cfgLDAP
This group allows you to congure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the cong or getcong subcommands.
To use this object property for CMC, you must have the Chassis Conguration Administrator privilege.
The following sections provide information about the objects in the cfgLDAP group.
116