Reference Guide
cfgChassisPowerCapF (Read/Write)
Description Indicates the maximum power consumption limit (in Watts) for the entire chassis. Use
cfgChassisPowerCapF when power consumption is to be changed regardless of whether server
throttling is required. This command generates an error if the value for this setting is lower than
the minimum power required for the chassis conguration.
Legal Values 539 – 3371 Watts
Default 3371 Watts
cfgChassisPowerCapBTU (Read/Write)
Description Indicates the maximum power consumption limit (in BTU/hr) for the entire chassis. The command
generates an error if server throttling is necessary to achieve the power goal based on the value
for this setting.
Legal Values 1839-11501 BTU/hr
Default 11501 BTU/hr
cfgChassisPowerCapFBTU (Read/Write)
Description
Indicates the maximum power consumption limit (in BTU/hr) for the entire chassis. Use
cfgChassisCapFBTU when power consumption is to be changed regardless of whether server
throttling is required. The command generates an error if the value for this setting is lower than
the minimum power required for the chassis conguration.
Legal Values 9264 - 56931 BTU/hr
Default 56931 BTU/hr
cfgChassisPowerCapPercent (Read/Write)
Description
Indicates the power consumption limit as a percentage. The percentage is computed
mathematically as the minimum power + (percent * (maximum power - minimum power)). The
command generates an error if server throttling is necessary to achieve the power goal based on
the value for this setting.
Legal Values 16 - 100
NOTE: If the specied percent is lower than the minimum value, the CMC will set the
value to the minimum value.
Default 100
cfgChassisPowerCapFPercent (Read/Write)
Description
Indicates the power consumption limit as a percentage. The percentage is computed
mathematically as the minimum power + (percent * (maximum power - minimum power)). Use
126