Reference Guide

help and help <subcommand>
Description Lists all the subcommands available for use with RACADM and provides a short description for
each. You may also type a subcommand, group, object, or FQDD alternate name after help.
Synopsis
• racadm help
• racadm help <subcommand>
Input None
Output
• The help command displays a complete list of subcommands.
• The racadm help < subcommand > command displays information for the specied
subcommand only.
• The racadm help -g < groupname > command displays information for the specied group.
• The racadm help -o < objectname > command displays information for the specied object.
• The racadm help < FQDD Alias >.< Group > command displays information for the specied
group.
• The racadm help < FQDD Alias >.< Object > command displays information for the specied
object.
• The racadm help < FQDD Alias >.< Group >.< Object > command displays information for the
specied object.
Example
racadm help system.power
racadm help system.power.supply
chassislog
Description
Allows you to view, export, or clear the chassis log history.
To clear a chassis log, you must have the Clear Logs Administrator privilege.
NOTE: It is recommended that you use Firmware RACADM to run this subcommand.
Synopsis
racadm chassislog view [-i]
racadm chassislog view [-c <category>] [-s <severity>] [-b
<subcategory>]
[-q <sequence no.>] [-n <number of records>] [-r <start
timestamp>]
[-e <end timestamp>]
Input
• -i — Displays the number of records present in the active log. You cannot use this option
with any other option.
• -c — The log type to lter the records. Provide multiple categories using a "," as the
delimiter. The value is case-insensitive. Valid Category values:
– All
– System
– Updates
– Audit
– Cong
• -b — The subcategory used to lter the records. Provide multiple subcategories using a “,”
as the delimiter. The value is case-insensitive.
• -q — The sequence number from which the records must be displayed.
• -n — Species the n Number of records to be displayed.
18