Reference Guide

• Power budget information — getpbinfo
• KVM information — getkvminfo
• NIC information (CMC module) — getniccfg
• Redundancy information — getredundancymode
• Trace log information — gettracelog
• RAC event log — getraclog
• System event log — getsel
Output The following information is displayed when the racdump subcommand is processed:
• General system/RAC information
• Coredump
• Session information
• Process information
• Firmware build information
Example
racadm racdump
===============================================================================
General System/RAC Information
===============================================================================
CMC Information:
CMC Date/Time = Mon Jul 04 2016 18:50
Primary CMC Location = CMC
Primary CMC Version = 2.00
Last Firmware Update = Mon Jul 03 2016 20:06
Hardware Version = A00
CMC Network Information:
NIC Enabled = 1
MAC Address = F8:BC:12:32:E6:80
Register DNS CMC Name = 0
DNS CMC Name = cmc-grapple
Current DNS Domain = SSEFW.COM
VLAN ID = 1
VLAN Priority = 0
VLAN Enabled = 0
CMC IPv4 Information:
IPv4 Enabled = 1
Current IP Address = 10.94.224.187
Current IP Gateway = 10.94.224.1
Current IP Netmask = 255.255.255.0
DHCP Enabled = 1
Current DNS Server 1 = 10.116.2.250
Current DNS Server 2 = 10.116.2.251
DNS Servers from DHCP = 1
CMC IPv6 Information:
IPv6 Enabled = 0
Autoconfiguration Enabled = 1
Link Local Address = ::
Current IPv6 Address 1 = ::
Current IPv6 Gateway = ::
Current IPv6 DNS Server 1 = ::
Current IPv6 DNS Server 2 = ::
DNS Servers from DHCPv6 = 1
Chassis Information:
System Model = PowerEdge FX2s
System AssetTag = 00000
Service Tag = grapple
65