Reference Guide

– <speed> = 10, 100
– <duplex> = half, full
• -r — Enable or disable redundant mode. The legal values are:
– 1 — Enable
– 0 — Disable
NOTE: The options -o, -k, -p, and -r can be specied for chassis only.
• -6:
– Sets static IPv6 addresses (w/ -s option).
– Enables autocong for IPv6 (w/ -d option).
– Disables IPv6 (w/ -p option).
– Can be specied for chassis or servers.
Example
• racadm setniccfg -s 192.168.0.120 255.255.255.0 192.168.0.1
• racadm setniccfg -d
• racadm setniccfg -d6
• Conguration of speed = 100Mbps and duplex= full duplex:
racadm setniccfg -k 100 full
• Conguration of speed and duplex to autonegotiate:
racadm setniccfig -k
• Conguration of redundant mode:
racadm setniccfg -r 1
• Conguration of VLAN id and priority of a slot or all blades in a sleeve:
racadm setniccfg -i 5 -v 1000 7
• Conguration of CMC to a static IPv6 address:
racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1
• Conguration of server to use stateless autoconguration address:
racadm setniccfg -m server-1 -d -6
• Conguration of VLAN id and priority for a switch:
racadm setniccfg -m switch-1 -v 1000 7
• Removal of VLAN conguration from a switch:
racadm setniccfg -m switch-1 -v
setractime
Description
Sets the date and time on the CMC.
To use this subcommand, you must have the Administrator privilege.
Synopsis
• racadm setractime -d <yyyymmddhhmmss.mmmmmmso>
• racadm setractime -l YYYYMMDDhhmmss
• racadm setractime -z {?|timezone|timezone-prex*}
Input
• -d — Sets the time in the string yyyymmddhhmmss.mmmmmmso where:
— yyyy is the year
77