Reference Guide

• Enable the alert
racadm config -g cfgIpmiPet -o cfgIpmiPetAlertEnable -i 1
• Set the destination e-mail IP address
racadm config -g cfgIpmiPet -o cfgIpmiPetAlertDestIpAddr -i 1
192.168.0.110
• View the current test trap settings
racadm getconfig -g cfgIpmiPet -i <index>
where <index> is a number from 1 to 4.
traceroute
Description Traces the network path of routers that packets take as they are forwarded from your system to
a destination IPv4 address.
To use this subcommand, you must have the Administrator permission.
Synopsis
• racadm traceroute <IPv4 address>
• racadm traceroute 192.168.0.1
Input
racadm traceroute 192.168.0.1
Output
traceroute to 192.168.0.1 (192.168.0.1), 30 hops
max,
40 byte packets
1 192.168.0.1 (192.168.0.1) 0.801 ms 0.246 ms 0.253 ms
traceroute6
Description
Traces the network path of routers that packets take as they are forwarded from your system to
a destination IPv6 address.
To use this subcommand, you must have the Administrator permission.
Synopsis
• racadm traceroute6 <IPv6 address>
• racadm traceroute fd01::1
Output
traceroute to fd01::1 (fd01::1) from fd01::3,
30 hops
max, 16 byte packets
1 fd01::1 (fd01::1) 14.324 ms 0.26 ms 0.244 ms
87