Reference Guide
3
CMC Property Database Group and Object
Descriptions
The CMC property database contains the conguration information for CMC. Data is organized by associated object, and objects are
organized by object group. The IDs for the groups and objects that the property database supports are listed in this section for CMC.
Use the group and object IDs with the RACADM subcommands to congure CMC.
NOTE: RACADM sets the value of objects without performing any functional validation on them. For example, RACADM
allows you to set the Certicate Validation object to 1 with the Active Directory object set to 0, even though Certicate
Validation can happen only if Active Directory is enabled. Similarly, the
cfgADSSOEnable object can be set to 0 or 1 even
if the cfgADEnable object is 0, but it takes eect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where otherwise noted.
idRacInfo
This group contains display parameters to provide information about the specics of CMC being queried. One instance of the group
is allowed.
Use this object with the getconfig subcommand.
To use this object, you must have CMC Login User privilege.
The following sections provide information about the objects in the idRACInfo group.
idRacProductInfo (Read Only)
Description
A text string that identies the product.
Legal Values A string of up to 63 ASCII characters.
Default for iDRAC Integrated Dell Remote Access Controller.
Default for CMC Chassis Management Controller.
idRacDescriptionInfo (Read Only)
Description
A text description of the RAC type.
Legal Values A string of up to 255 ASCII characters.
Default This system component provides a complete set of remote management functions for Dell
PowerEdge servers.
88